Pressed Clovers: {Tutorial} Photo Flower Pots

Pinned it, Did it!

Here is the pinned item:

And here is my item! :)

Ya'll know I don't usually do tutorials, but this project came out so stinkin' cute, I had to share it. I found the original idea on Pintrest (Pinned It, Did It!) but never found great directions. Here are the directions for an adorable photo flower pot.

What you will need (or what I used):
Newspaper or something to avoid a major mess
Terracotta Flower Pots
Mod Podge
White Acrylic Paint
Foam Brushes
Access to a laser printer or copier - NO INK JET
Flower

Optional:
Ribbon, Buttons - your choice of stuff for the lip
Oil Diffuser Ring
Hot Glue
Super Glue

Ok, I think that will get you ready for cuteness. I did this at work it's so easy, so pretend like you don't see my work desk in these pictures, ok?

I first painted the clay pots white. You don't have to, I just liked the look of it better. I used a foam brush and wasn't careful because it will mostly be covered up with pictures and ribbon. It dried super quick.

I didn't paint all the way inside because you'll be adding a flower later. I chose to include the base of the flower pots, too, but that is optional.

I used Publisher to make up plenty of pictures for the pots. I think my pots were 6" and it took 15 pictures to cover pretty well. I did use two different sizes - a smaller (2" x 2") and larger size (2.4" x 2.4"). I also learned to leave a bit of "dead space" in the pictures and not fill the frames up with faces BECAUSE you'll need to overlap a bit.

I printed on a laser printer with regular copy paper and worried they would streak when I applied the glue, but they didn't. I do not believe an ink jet printer will work on this.

I also learned by the second one to lay out the design to see if you'll be covering up people's faces or not. Or to make sure the kids are scattered all the way around and not just in one spot.

Grab your Mod Podge and smear some on the pot with another foam brush. Take a photo and press it into the glue, smoothing it out as you go with your fingers. Keep doing this until everything is covered. I did have some white gaps showing the painted pot at the top, no biggie. Just keep smoothing as you go. I did end up with a few wrinkles, but it wasn't very noticable. The copy paper is very thin, but I think anything thicker might not adhere as easily?? Thoughts on this - please share.

Once you are totally covered, smear Mod Podge all over the outside using your foam brush. It dries clear so no worries! (I had never used it and it was SO EASY!) I do recommend keeping it going in one direction because you will see brush strokes in certain lights.

See, it's clear! I must have done 4 coats or more, letting each one dry before adding another to it. I wanted a good solid coating before I gifted it.

After they dried I used super glue to adhere ribbon around the top lip for decor. Hot glue seems to leave ridges and super glue doesn't. Understand, it will NOT lay flat all the way around because the edges are tapered. To get bubbles at the bottom edge of the ribbon out, I made a little snip with scissors right in the middle of the bubble, overlapped and glued down the two sides and it removed the bubbles. I hot glued buttons and bows to add some color to all this black/white scheme! And thankfully, I found flowers that fit perfect into the pots with liners!!

Optional addition: because I was planning to use live flowers that would require water, I decided to add an oil diffuser ring to the bottom so the bottom of the pots wouldn't be standing in water. I hot glue those on, too. Anything would work - like a shower ring, I would think. But those only added a dollar to the overall cost. I thought they turned out so cute - the diffusers are almost like a little pedestal for the pots. :)

Tell me what you think! I'm sharing this on Pintrest, too. And please share your pictures if you decide to do it!! I'd love to see how yours turn out. It's awesome to see everyone's take on it, you know? So please share!! :)